On paper, the process may appear simple: the water is pumped into a different location. In practice, distances between these two points could be affected by differences in elevation, solids and pressure requirements, as well as storage capacity, electrical equipment, site restrictions, and changes in the rate of flow.

Image credit: romtecutilities.com

For Romtec Utilities to design the pump station starts by setting the operating conditions, rather than choosing the appropriate equipment from a catalog. Initial design and budgetary details could be designed based on what is required by the project.

Think about where is our next destination?

The engineering is changed immediately.

Domestic sewage could contain solids, and can experience a variety of variations in the daily flow. When gravity conveyance fails or isn’t sufficient the wastewater lift station will be required to move the wastewater. Engineers need to take into account the following aspects: expected flow as well as peak condition, pumping capacity, behavior of the wet well discharge requirements, and how the equipment is maintained and operated.

Industrial water poses a variety of challenges. A processing or manufacturing facility may require moving high-temperature, caustic, oily, or high-pressure fluids. Romtec Utilities designs industrial systems for applications ranging from power generation and food processing to data centers, pharmaceutical waste, and oil and gas facilities.

Rainfall may create a completely distinct operating cycle

Stormwater systems may be able to endure long periods of a lack of activity and then face substantial quantities during a hurricane.

A stormwater lift station associated with a detention basin, for example, must work with the site’s larger drainage strategy. As the water flows into the basin, temporary storage controls the immediate volume, and a pumping system moves the water that is collected to an approved discharge point.

Romtec Utilities offered this type of solution to a Norco, California business park. A pumping system was required to empty the detention reservoir and discharge it into the stormwater network. The station was planned to be part of the drainage system for a particular development rather than as an independent piece of equipment.

The term “package” doesn’t necessarily mean off-the-shelf

A common misconception is that a system of pumping packages is just a predetermined assortment of components.

In the case of engineering infrastructure packaging may mean that the entire system of components are incorporated into a single system. Meters, valves, pumps control, communications, structural components, and other equipment can be arranged according to the necessary duty requirements.

This approach is especially helpful in situations where the new system has to be connected with an existing infrastructure. Municipal and industrial plants facilities are not able to provide unlimited space or even clean installation conditions. The equipment could need to be modified in accordance with existing structures, piping systems, electrical system, and operating schedules.

Capacity planning has real consequences

The cost of undersizing rises when the facility is expanded.

Romtec Utilities, a Portland International Airport utility company, created and supplied the sewer interceptor station for the PDX Next project. The new station is planned to double the peak-flow capability of the existing system when airport facilities expand.

It demonstrates a key engineering principal: design specifications shouldn’t just be what a building manages on a typical afternoon. Engineers must be aware of what happens when demand is high.

The job isn’t done until the Equipment arrives

Drawings and calculations eventually evolve into an operating system. Installation coordination, startup, testing documentation, and user comprehension all play a role in the long-term success of.

After a few years, the effectiveness of an engineered pumping system is measured. The decisions made during initial design are clear whenever equipment needs maintenance as flows rise or when a storm hits.

Romtec Utilities combines these decisions to provide a complete pumping solution for a specific project. It assists in transforming equipment into infrastructure specially designed to meet the specific conditions in which it will be used.